WELDARC 200i KEY FEATURES
- Aluminium Tig Welding
- 200 Amp AC or DC TIG
- AC TIG for Aluminium
- 170 Amp stick welder
- Quality 8m TIG torch
- HF Pulse start or Lift Arc start
- Pulse TIG
- Compact, light weight design
- Suits 2-4.0mm electrodes
- 15 Amp supply plug
A built in VRD (Voltage Reduction Device) delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.
At 19.5kg, the Weldarc 200i can go wherever the job takes you, making it suitable for onsite maintenance.
The polarity of the output current can be selected between AC or DC. AC can be used specifically for welding aluminium. The AC DC TIG features makes it an ideal all round maintenance machine.
The Pulse TIG features allows the user to adjust current peak and pulse frequency. Pulse TIG reduces heat input to material but still allowing filler metal melt, and maintain good penetration. Useful on thin materials, and near edges.
» Read More
HF PULSE START
HF Pulse is a non-contact arc starting method allowing easy arc start without the interference problems with conventional HF and eliminates tungsten contamination. Available in AC or DC TIG mode.
BUILT-IN OPERATOR SAFETY
The power source features a built-in thermal protection device that will activate if the machine is operated beyond its safe thermal operating zone.
HOT START FOR MANUAL ARC
Built-in “Hot Start” feature in stick mode for even better arc starting.
Built in “Arc Force”, constantly monitors arc voltage and will boost output if low arc voltage occurs.
LIFT ARC TIG START
Easy to use lift arc starting for TIG welding. Eliminates scratch starting and tungsten electrode damage.
The Weldarc 200i is tolerant to unconditioned power from generators. It has been optimised and tested for compatibility with appropriate portable generators.
With a 2 year unlimited warranty, covering parts and labour, and supported by an Australia wide service network, you can be guaranteed you’re buying reliability and performance. *Power source only.
- Work Lead (3m)
- Industrial Twist Lock Electrode Holder (3m)
- TIG Torch (8m)
- Gas Regulator
|PRIMARY VOLTAGE||240 Vac - 50/60 Hz|
|RATED PRIMARY CURRENT||13 Amps|
|MAX PRIMARY CURRENT||34 Amps|
|RECOMMENDED GENERATOR kVA||10 kVA|
|SUPPLY PLUG||15 Amps|
|RATED OUTPUT @ 40C (10 MIN)||Stick MMA 170 A, 26.8 V, 15% Duty Cycle 66 A, 22.6 V, 100% Duty Cycle,TIG 200 A, 18 V, 15% Duty Cycle 77 A, 13.1 V, 100% Duty Cycle|
|WELDING CURRENT RANGE||5 - 170 Amps(Stick MMA), 5 - 200 Amps(TIG)|
|ELECTRODE SIZE RANGE (MM)||2.0, 2.5, 3.2, 4.0|
» Read Less